| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 3 Months to One Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4Z2.3-G11
| Engine Speed | Type of Operation | Engine Power | Generator Power | |
| rpm | kW | kW | kVA | |
| 1500 | Prime Power | 16 | 12 | 15 |
| Standby Power | 18 | 13.2 | 16.5 | |
| SPECIFICATIONS | FUEL CONSUMPTION | ||
| Engine Model | 4Z2.3-G11 | Power | L/h(1500r/min) |
| Engine Type | In-line,4strokes, water-cooled | 25% | 1.8 |
| 50% | 2.6 | ||
| Combustion type | Direct injection | 75% | 3.7 |
| Cylinder Type | Wet liner | 100% | 4.7 |
| Number of cylinders | 4 | 110% | 5.2 |
| Bore × stroke | 85× 100 mm | ||
| Displacement | 2.3L | ||
| Compression ratio | 18 : 1 | ||
| Firing order | 1-3-4-2 | FUEL SYSTEM | |
| Injection timing | 14-17° | Injection pump | KangDa |
| Dry weight | 220 kg | Governor | Mechanical type |
| Dimensions | 919×565×760mm | Feed pump | Mechanical type |
| (L×W×H) | Injection nozzle | Multi hole type | |
| Rotation | Counter clockwise viewed from Flywheel | Opening pressure | 24MPa |
| Fly wheel housing | SAE 4# | Fuel filter | Full flow, cartridge type |
| Fly wheel | SAE 7.5#(tooth number 109) | Used fuel | Diesel fuel oil |
| MECHANISM | LUBRICATION SYSTEM | ||
| Type | Overhead valve | Lub. Method | Fully forced pressure feed type |
| Number of valve | Intake 1, exhaust 1 per cylinder | Oil pump | Gear type driven by camshaft |
| Valve lashes at cold | Intake 0.28mm | Oil filter | Full flow, cartridge type |
| Exhaust 0.33mm | Oil pan capacity | High level 6 L | |
| Low level 5 L | |||
| VALVE TIMING | Angularity limit | Front down 25° | |
| Opening Close | Front up 35° | ||
| Intake valve | 12°BTDC 38°ABDC | Side to side 35° | |
| Exhaust valve | 50°BBDC 14°ATDC | Lub. Oil | Refer to Operation Manual |
| COOLING SYSTEM | ENGINEERING DATA | ||
| Water capacity | 4L | Heat rejection to coolant | 1.9 kcal/sec(1500r/min |
| (engine only) | |||
| Lid Min. pressure | 70kPa | Air flow | 1.7m3/min (1500r/min) |
| Water pump | Centrifugal type driven by belt | ||
| Water pump Capacity | Exhaust gas flow | 4.2m3/min(1500r/min) | |
| Thermostat | Wax-pellet type | Exhaust gas temp. | 480 °C |
| Opening temp. 72°C | Max. permissible restrictions | 3 kPa initial | |
| Full open temp. 82°C | Intake system | 4 kPa final | |
| Cooling fan | Blower type, plastic | Exhaust system | 10 kPa max |
| 400 mm diameter, 7 blades | intercooler permissible restrictions |
||
| Power concumption 1.2 kW | |||
| The maximum temp. of coolant in prime/ Standby power | 104/100ºC | ||
| ELECTRICAL SYSTEM | |||
| Charging generator | 14V×35A | ||
| Voltage regulator | Built-in type IC regulator | ||
| Starting motor | 12V×3kW | ||
| Battery Voltage | 12V | ||
| Battery Capacity | 110~120 AH | ||
){kind=link}