Sdec 300kw Engineering Construction Trailer Type Generator Set Diesel Generator Set

• Customization: Available
• After-sales Service: International Warranty Service
• Warranty: 1 Year
• Model NO.: SC12E420D2
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit
• Landuse Type of Unit: Ordinary
• Excitation Mode: AC Rotating Exciter
• Combustion Type: Direct Injection
• Cylinder Type: Wet Liner
• Number of Cylinders: Six
• Engine Type: in-Line,4 Strokes, Water-Cooled
• Transport Package: Wooden Box
• Specification: 300KW
• Trademark: SDEC
• Origin: China or Import
• HS Code: 8502110000
• Production Capacity: 20000PCS/Year
• Package Size: 370.00cm * 140.00cm * 190.00cm
• Package Gross Weight: 2800.000kg
• Lead Time: 30 days (1 - 100 Sets) ; To be negotiated ( > 100 Sets)

Product Description

Product Parameters

SC12E420D2
 Power 

Rotational speed	Mode of operation	Engine power	Unit power
r/min		kW	kV	kVA
1500	Common power	280	250	312.5
	Standby power	308	280	350

-. The performance of diesel engine complies with GB/T2820-. Power calibration according to GB/T1147.1
 
→ Commonly used power: For variable load applications, there is no limit on usage hours throughout the year. The average allowable output power for 24 hours of continuous operation shall not exceed 80% of the commonly used rated power.
→ Standby power: It is applied when the power grid is cut off, or under test conditions, and the annual service time shall not exceed 200 hours at most. The average allowable output power for 24 hours of continuous operation shall not exceed 80% of the standby rated power.
Do not overload operation
 

Basic specifications		Fuel consumption
Diesel model	SC12E420D2	Power	L/h (1500r/min)
Diesel engine type	Inline, 4-stroke, 4-valve, water-cooled	25%	19.1
	Supercharged air cooling	50%	33.8
Combustion Mode	Direct injection	75%	49.0
Cylinder Type	Wet cylinder liner	100%	66.9
Number of cylinders	6	110%	74.3
Cylinder bore × stroke	128 × 153 mm
Displacement	11.8 L
Compression ratio	17: 1	Fuel system
Order of ignition	1-5-3-6-2-4	Fuel injection pump	Longkou inline P-type pump
Fuel injection advance angle	14.5 ° BTDC	Governor	Electrical control
Net weight	1164 kg	Oil transfer pump	Mechanical
Overall dimensions (L × W × H)	1787 × 918 × 1304 mm	Fuel injector	Porous type
Direction of crankshaft rotation	Counter-clockwise (viewed from the flywheel end)	Opening pressure	250 kg/cm2
Flywheel housing	SAE 1 #	Fuel filter	Spinning full flow type
Flywheel	SAE 14 # (number of teeth 133)	Fuel	Light diesel oil
Valve train		Lubrication system
Type	Overhead valve	Lubrication method	Pressure splash type
Number of valves	2 in 2 rows per cylinder	Oil pump	Crankshaft driving gear mode
Cold valve clearance	Intake valve 0.40 mm	Oil Filter	Spinning full flow type
	Exhaust valve 0.65 mm	Oil Capacity	Max 36 L
			Minimum 31 L
Valve timing		Offset sump tilt angle	Tilt forward 25 °
	OpenClose		Tilt back 35 °
Intake valve	15 ° BTDC 30 ° ABDC		Left/right tilt 35 °
Exhaust Valve	45 ° BBDC 13 ° ATDC	Lubricating oil	Refer to Use and Care Instructions
Cooling system		Diesel engine data
Cooling method	Fresh water circulation cooling	Coolant heat loss	30.9 kcal/sec (1500r/min)
Coolant Capacity	23.2 L	Intercooler heat loss	19.3 kcal/sec (1500r/min)
(Engine Only)		Intake flow rate	21.6 m3/min (1500r/min)
Minimum pressure cap pressure	70kPa	Exhaust Flow	51.8 m3/min (1500r/min)
Water pump	Centrifugal, belt driven	Exhaust Temperature	600 °C
Water pump flow rate	515 L/min (1500r/min)	Maximum allowable resistance	3kPa (new filter element)
Thermostat	Wax type	Air intake system	6 kPa (dirty filter element, need to be replaced)
	Turn on temperature. 85 °C	Exhaust system	10 kPa ( Max)
	Full open temperature. 95 °C	Intercooler resistance limits	10 kPa
Fan	Blowing type, plastic fan	Electrical system
	Diameter 843 mm, 8 pieces	Generator	28 V × 55 A
	Power consumption 10 kW	Voltage regulator	Integral, integrated circuit regulator
Maximum engine coolant temperature at standby/usual power	104/100ºC	Starter motor	24 V × 7. 5 kW
		Battery voltage	24V
		Battery capacity	180 AH

 

 

Detailed Photos

 

Certifications

 

Company Profile

Weifang Leiteng Power Machinery Co., Ltd. is a research and development, production, sales, service in one of the diesel engine, gas engine and generator set professional equipment enterprises, specializing in high-end products. Founded in September 2013, it is located in Qingzhou, Weifang, the power city of China. Products are widely used in fire emergency, data center, power, factory, communication, municipal engineering, hydraulic engineering, construction, agriculture and breeding, mining, oil transmission, gas transmission, chemical industry, coal and other national key projects.

Our company has formulated the strategic goal of "integrating the world's advanced technology, creating the top power of Leiteng, and serving users around the world". Adhere to the "unity, hard work, realistic, innovative" business philosophy, pursue the "serious product, integrity of the market" business purpose, always put product quality and customer interests in the first place, to provide customers with first-class products and services, to achieve mutual benefit and win-win!

 

FAQ

 

Q1. Are you a manufacturer?
Yes, Weifang Leiteng Power Machinery Co., Ltd. is a high-tech comprehensive manufacturer integrated with R&D, production and sales, specializing in supplying high-quality diesel engine, gas engine, diesel generator sets and petrol generator sets.

Q2. What's your MOQ(Minimum Order Quantity)?
1 Set, the more you buy, the cheaper price you get!

Q3. What's your term of delivery?
EXW, FOB, FAC, CFR, CIF, CIP

Q4. What's your package method?
For open type diesel generator set, you could choose wooden box packing.