| Customization: | Available |
|---|---|
| After-sales Service: | International Warranty Service |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SC9D340D2
POWER RATING
| Engine Speed | Type of Operation | Engine | Genset | ||
| r/min | kW | Ps | kW | kVA | |
| 1500 | Prime Power | 228 | 310 | 200 | 250 |
| Standby Power | 255 | 347 | 220 | 275 | |
| SPECIFICATIONS | FUEL CONSUMPTION | ||
| Engine Model | SC9D340D2 | Power | lit/hr |
| Engine Type | In-line,4 strokes, water-cooled | 25% | 14.8 |
| Turbo charged with aftercooler | 50% | 27.0 | |
| 75% | 40.1 | ||
| Combustion type | Direct injection | 100% | 53.6 |
| Cylinder Type | Wet liner | 110% | 59.8 |
| Number of cylinders | 6 | ||
| Bore × stroke | 114× 144 mm | ||
| Displacement | 8.82L | ||
| Compression ratio | 16.5 : 1 | ||
| Firing order | 1-5-3-6-2-4 | FUEL SYSTEM | |
| Injection timing | 8.5°BTDC | Injection pump | Longkou in-line "P" type |
| Dry weight | 900kg | Governor | Electric type |
| Dimension | 1518×778×1321 mm | Feed pump | Mechanical type |
| Injection nozzle | Multi hole type | ||
| Rotation | CCW viewed from flywheel | Opening pressure | 250 kg/cm2 |
| Fuel filter | Full flow, cartridge type | ||
| Fly wheel housing | SAE NO.2 | Used fuel | Diesel fuel oil |
| Fly wheel | SAE NO.11.5 | ||
| 125EA | |||
| MECHANISM | LUBRICATION SYSTEM | ||
| Type | Over head valve | Lub. Method | Fully forced pressure feed type |
| Number of valve | Intake 2, exhaust 2 per cylinder | Oil pump | Gear type driven by crankshaft |
| Valve lashes at cold | Intake 0.30mm | Oil filter | Full flow, cartridge type |
| Exhaust 0.55mm | Oil pan capacity | High level 25 liters | |
| Low level 22 liters | |||
| VALVE TIMING | Angularity limit | Front down 25 deg. | |
| Opening Close | Front up 35 deg. | ||
| Intake valve | 29.5°BTDC 42.5°ABDC | Side to side 35 deg. | |
| Exhaust valve | 69.5°BBDC 34.5°ATDC | Lub. Oil | Refer to Operation Manual |
| COOLING SYSTEM | ENGINEERING DATA | ||
| Cooling method | Fresh water forced circulation | ||
| Water capacity | 12 liters | Heat rejection to coolant | 22.9kcal/sec /1500 r/min |
| (engine only) | Heat rejection to CAC | 14.3kcal/sec /1500 r/min | |
| Pressure system | Max. 0.5 kg/cm2 | Air flow | 16.7m3/min /1500 r/min |
| Water pump | Centrifugal type driven by belt | Exhaust gas flow | 36.9m3/min /1500 r/min |
| Water pump Capacity | 200 liters /min | Exhaust gas temp. | 600 °C /1500 r/min |
| at 1,500 rpm (engine) | Max. permissible restriction | 3 kPa initial | |
| Thermostat | Wax-pellet type | ||
| Opening temp. 82°C | Intake system | 6 kPa final (need charge filter element) | |
| Full open temp. 93°C | |||
| Cooling fan | Blower type, plastic | Exhaust system | 10 kPa max. |
| 762 mm diameter, 10 blades | Intercooler resistance limit | 10 kPa | |
| Power dissipation 8kW | |||
| ELECTRICAL SYSTEM | CONVERSION TABLE | ||
| Charging generator | 28V×55A | in. = mm × 0.0394 | lb/ft = N.m × 0.737 |
| Voltage regulator | Built-in type IC regulator | PS = kW × 1.3596 | U.S. gal = lit. × 0.264 |
| Starting motor | 24V×7.5kW | psi = kg/cm2 × 14.2233 | kW = 0.2388 kcal/s |
| Battery Voltage | 24V | in3 = lit. × 61.02 | lb/PS.h = g/kW.h × 0.00162 |
| Battery Capacity | 180 AH | hp = PS × 0.98635 | cfm = m3/min × 35.336 |
| lb = kg × 2.20462 | |||
Weifang Leiteng Power Machinery Co., Ltd. is a research and development, production, sales, service in one of the diesel engine, gas engine and generator set professional equipment enterprises, specializing in high-end products. Founded in September 2013, it is located in Qingzhou, Weifang, the power city of China. Products are widely used in fire emergency, data center, power, factory, communication, municipal engineering, hydraulic engineering, construction, agriculture and breeding, mining, oil transmission, gas transmission, chemical industry, coal and other national key projects.
){kind=link}